Gear Boxes, Motors, & Drives

MOTOR, 1/2HP,90VDC,WASHDOWN,56CFACE

MOTOR, 1/2HP,90VDC,WASH DOWN, 56CFACE Motor for Conveyors.

View Product Details

MOTOR, 1/2HP, 1750RPM, 90VDC

Motor, 1/2HP, 1750RPM, 90VDC This motor is used on APACKS Conveyors & Cappers   Use the E-PAK Part Number...

View Product Details

SEAL, GEAR BOX OUTPUT SHAFT

SEAL, GEAR BOX OUTPUT SHAFT USE ON 1092-100 AND 1092-108

View Product Details

SEAL, GEAR BOX INPUT SHAFT

SEAL, GEAR BOX INPUT SHAFT USE ON 1092-100 AND 1092-108

View Product Details

COUPLING, 3/4" BORE LOVEJOY

View Product Details

DC MOTOR DRIVE, HORSE POWER RESISTORS, FOR KBIC BOARDS

DC Motor Control Board Resistor Each KBIC Board needs a horse power resister, sized for the motor.

View Product Details

DC MOTOR DRIVE, 120VAC BOARD KBIC

DC Motor Control Board For DC motor control on cappers, conveyors, and similar machines. Board controls min/max and acceleration of motor speed range. Plug in resistors from 1/100 to 1 HP (see chart below). Horse Power...

View Product Details

GEARBOX, Y1 ZEROMAX

Manual speed controller used for adjusting the speed on AC drive conveyors.

View Product Details

GEARBOX, JK-3

Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: both clockwise and counter clockwise.

View Product Details

GEARBOX, JK-2

Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: clockwise.

View Product Details

GEARBOX, JK-1

Used for speed regulation on AC motor control use on AC drive turntables and conveyors. 0-400RPM when used with 1800RPM motor. Motor direction: counter clockwise.

View Product Details

COVER, SHAFT FOR REDUCERS

COVER, SHAFT FOR REDUCERS

View Product Details

GEAR REDUCER, 36:1 BRAVO

Gear Reducer, 36:1 Bravo Gear reducer used for conveyor drive. * Do Not mix Lubricants in the reducer.  If oil is needed, drain the gear box and replace all of the oil...

View Product Details

GEAR REDUCER, 40:1 ELECTRA W/RING

Gear reducer used for conveyor drive. NOT Available, and has been replaced by: 1092-100

View Product Details

MOTOR, 1/2HP 1750RPM 90VDC

Motor, 1/2HP, 1750RPM, 90VDC Motor drive for Conveyors and 4 Station Capper, (sometime the 3 Staion Capper) (Spindle Drive).

View Product Details